TPO Membrane Repair & Maintenance Near You in Albany, NY

TPO is a tough single-ply membrane, but its weak points are predictable: the heat-welded seams, the flashing at curbs and pipe penetrations, and any low spot that holds water. Mastaba Roofing repairs all of them across Albany and the Capital Region. For seam splits and open laps we reactivate the joint with a hot-air welder so the membrane fuses back into one watertight sheet, a true weld, not a bead of caulk that fails by the next winter. That distinction matters: patching with sealant hides the problem, while heat-welding restores the seam to original strength.

Membrane cuts and punctures from foot traffic, dropped tools, or wind-driven debris get cleaned, primed, and welded over with a new TPO patch. Flashing and penetration failures, lifted corners, split target patches, separated pipe boots, are stripped and re-welded with fresh membrane and termination details. Where ponding water is breaking down the membrane, we correct the cause: clearing or adding drains, building tapered crickets, or re-pitching low spots before re-welding. Most repairs in the Capital Region start around $400 for a single puncture or seam, with larger ponding and flashing jobs priced after a free inspection.

Not every roof should be repaired. When the membrane is still sound and the damage is localized, targeted repair is the cost-smart choice. But once the TPO is brittle from age and UV, cracking across multiple seams, or the repair area climbs past roughly a quarter of the roof, replacement usually saves money long term. We inspect free and tell you honestly which way the math points, and offer financing at $0 down, up to 140 months, when bigger work is the right call.

• Hot-air welded seam repair that fuses split or open laps back watertight, never just caulk
• Puncture, cut, flashing, and penetration reseals plus ponding-water and drainage correction
• Honest repair-vs-replacement guidance, backed by written warranty, fully insured single-ply specialists