Commercial Metal Roofing Near You in Albany, NY
Standing seam, structural, and retrofit metal systems for Capital Region warehouses, plants, and commercial buildings near you. Expect a 40-60 year lifespan, near-zero maintenance, reliable snow shedding, and cool-roof energy savings. Fully insured, with financing at $0 down, up to 140 months.
- Fully Insured
- 15+ Years Experience
- 10 Year Workmanship Warranty
- $0 Down Financing
- Fully Insured
- 15+ Years Experience
- 10 Year Workmanship Warranty
- $0 Down Financing
- 5 Star Verified Reviews
- 300+ Projects
Metal Roofing for Commercial Properties
Metal is the longest-lasting commercial roof in the Capital Region, and Mastaba Roofing installs the full range. Our standing seam systems use concealed-fastener seams in 24 or 26 gauge steel, snap-locked or mechanically seamed for high-wind, high-snow performance. We choose between structural panels that span open framing and architectural panels set over solid decking, matched to your building and slope.
For aging metal or low-slope buildings, retrofit framing lets us install a new standing seam roof over the existing one. A sub-purlin system creates slope and an air gap for added rigid insulation, raising R-value and cutting energy use without a full tear-off or shutting down operations below. It is the fastest, most cost-effective path to a 40-60 year roof.
Every panel is factory-finished with a PVDF (Kynar 500) coating that resists chalking, fading, and corrosion for decades and is available in reflective cool-roof colors. Installed pricing typically runs $5.50 to $12 per square foot depending on gauge, profile, and accessories. We provide a written, itemized estimate, and financing is available at $0 down, up to 140 months.
- Snap-lock and mechanically-seamed standing seam, structural and architectural, in 22-26 gauge steel
- 40-60 year lifespan with near-zero maintenance, the lowest lifetime cost commercial roof
- Kynar 500 / PVDF cool-roof coatings reflect heat and cut summer cooling loads
Our Installation Process
Structural Assessment
We measure the roof and confirm framing can carry panels or a retrofit
Written Estimate
Itemized quote: gauge, profile, coating, insulation, and labor
Panel Installation
Crew sets purlins or decking, then seams panels and flashes penetrations
Walkthrough & Warranty
Seam and fastener check, plus your written workmanship warranty
Transparent Pricing
Starting From
$5.50
per sq ft installed, standing seam
Final pricing runs $5.50 to $12 per square foot based on gauge, profile, and coating. Every estimate is free, itemized, and in writing before work begins. Financing available at $0 down, up to 140 months.
Common Problem
Repeated Repairs on Aging Commercial Roofs
Commercial buildings with asphalt or aging membrane roofs face constant repair cycles, business disruption, and rising maintenance costs that never end.
Mastaba Roofing Solution
One Metal Roof for 40-60 Years
A single concealed-fastener standing seam installation ends the repair cycle. Mastaba Roofing seams Kynar-coated panels watertight, optionally as a retrofit over your existing roof, backed by a written workmanship warranty.
What Capital Region homeowners say
Rated 5 stars by homeowners and business owners across the Capital Region. Read all reviews.
“Own a small office building in Albany and the roof was getting rough. Mastaba Roofing handled the replacement and it went way smoother than other construction projects I've dealt with. They worked around our tenants and didn't make a huge mess or anything.”
“Small office building in Albany. They worked around business hours and didn't disrupt tenants too much which I appreciated.”
“I'm doing this review on behalf of my Godmother, Marcia M. Mastaba Roofing repaired her slate roof without requesting a down payment, which is very rare these days. The job was finished, and we were all very pleased with the results. We would recommend them to anyone needing slate roof or other roof repairs. Thank you Mastaba Roofing!”
Why Mastaba Roofing
Free Written Estimate
10-Year Workmanship Warranty
Every commercial metal roof installation by Mastaba Roofing is backed by a written workmanship warranty, on top of the manufacturer's coating and panel warranties on standing seam and PVDF finishes. We are fully insured for your protection, and financing keeps cash flow easy at $0 down, up to 140 months.
New roof, $0 down.
$0 down financing up to 140 months, subject to credit approval. Every project is backed by our 10 year workmanship warranty.
Commercial Metal Roofing FAQ
How much does commercial metal roofing cost?
Installed standing seam runs roughly $5.50 to $12 per square foot in the Capital Region, driven by gauge (24 vs 26), panel profile, and PVDF coating. Architectural panels sit lower; structural standing seam with thicker steel costs more. Mastaba Roofing prices each project in writing after measuring.
Is metal roofing good for commercial buildings?
Yes. Standing seam metal lasts 40-60 years, sheds Albany snow loads, and carries minimal maintenance. Concealed-fastener seams resist leaks, and Kynar coatings hold color for decades. For warehouses, offices, and industrial buildings it delivers the lowest lifetime cost of any commercial roof.
Can you install metal over my existing commercial roof?
Often, yes. Retrofit framing lets us install standing seam over an aging metal or low-slope roof without a full tear-off, cutting cost and downtime. We verify structural capacity first, add a sub-purlin system and insulation, then mechanically seam the new panels watertight.
What metal panel profiles do you offer?
We install snap-lock and mechanically-seamed standing seam (1.5"-2" ribs), exposed-fastener corrugated and R-panel, and architectural flat-lock. Gauge ranges 22-26 depending on span and wind. Structural panels carry loads across open framing; architectural panels need solid decking beneath them.
How long does commercial metal roofing installation take?
Most installs run 1-3 weeks based on square footage, roof complexity, and penetrations. Retrofits over an existing roof move faster since there is no tear-off. Mastaba Roofing phases work around your operations so tenants, staff, and customers face minimal disruption throughout.
Does metal roofing lower energy costs?
Yes. PVDF/Kynar coatings in cool-roof colors reflect solar heat, and adding rigid insulation during a retrofit raises R-value substantially. Together they cut summer cooling loads on Capital Region commercial buildings, and many reflective systems qualify for ENERGY STAR and utility rebates.
Related commercial roofing services
Serving homes and businesses near you
Helpful guides from our team
Ready for a roof you never have to think about?
Free written estimates, fast scheduling and a crew that cleans up every nail. Call or send a request and we will be in touch the same day.
- Fully insured crews on every job
- 10 year workmanship warranty
- Atlas and Owens Corning roofing systems
- $0 down financing up to 140 months
- 4 offices across the Capital Region